About This Item
Automatic Switching Mode Battery Charger and Maintainer
Charge and maintain – automatic charge: On power-up, the charger will automatically go to the charging system.
Charge and Maintain – Automatic Maintenance: When the battery is fully charged, the charger automatically switches to maintain the battery. It will monitor the battery voltage and continue to peak performance to the battery.
Short circuit protection: The charger will automatically turn off when the output short-circuits to prevent damage.
Reverse polarity protection: The charger can automatically shut off without damage when the output polarity is reversed
Will never overcharge your battery.
Output short circuit protection.
Output overload protection: The charger uses a “solid state circuit interrupter” that opens under severe overload.
This condition may occur if attempting to charge a severely discharged or heavily sulfated battery.
Once the interrupter opens, the charger will stop charging for a short period and then resume charging automatically.
Reverse battery/overload condition: The charger has reverse battery and short circuit protection.
Internal overheat protection: Chargers have an internal overheat protection.
The power will be reduced if the ambient temperature increases. Corrosion-resistant output connectors.
Output clamps and ring terminals provided: The charger comes with a quick-connect fly lead and two different kinds of connectors, battery clamps and ring terminals. The ring terminals are perfect for permanent connection to your battery.
You can connect the lead to the battery and tuck the lead away while you are using your vehicle.
When you get back to your garage, simply plug the lead back into the charger.
Warranty 12 months
Product Length 10' / 3.05 M
Part/Model Number EWC612-1
Charge current: 1000 mA
Battery capacity while charging: 2–20 AH
Battery capacity while maintaining: 2–60 AH
Input connector: With 2-pin plug
Output lead: 10 ft. with trailer connector
Extension lead: 2 ft. with trailer connector + battery clamp
Extension lead: 2 ft. inline 3A fused with ring terminals